Aluminium venting tape for a multiwall sheet

Are you wondering how to close polycarbonate sheets? Aluminium venting tape for multiwall sheets is ideal for sealing the top and bottom edges of twinwall and multiwall polycarbonate and acrylic sheets. It is a highly economical and effective way to keep moisture and debris out. Aluminium venting tape or roofing tape for multiwall sheets functions as a breather tape for greenhouses, carports, conservatories, and even rooftops. Our aluminium venting tape for multi-wall sheets is specifically designed to prevent mold, algae, insects, and dust from getting into the walls of polycarbonate sheets. The tape is used to cap the top of the sheets so that debris cannot fall into the walls of polycarbonate panels. Aluminium venting tape for multiwall sheets also has excellent drainage. The tape structure is cleverly designed to ensure debris and mold are prevented from entering the polycarbonate sheets, while allowing condensation to find its way out easily.

Correct application is important for the effectiveness of AntiDUST® tape

For the tape to be effective, it is important that it is applied correctly. For a sloping installation, use sealing tape at the upper edge and breathable AntiDUST® tape at the lower edge so moisture can drain while dust and insects are restricted. The space between the sheets does not become an environment where algae and mold can thrive, because condensation and water can drain from it. Condensation between multiwall sheets cannot always be prevented, but correct edge ventilation and drainage help moisture leave the sheet instead of remaining trapped inside the cells.

Not all problems with multiwall sheets are related to moisture and condensation. Without using a proper breather tape, there is always a possibility of dust or insects getting into the sheets from the upper side. You prevent dust from getting inside multiwall polycarbonate sheets by using a breather tape that filters incoming air while keeping the lower sheet edge open for drainage.

The best roofing tape for polycarbonate panels

Polycarbonate sheets improve light transmission, which is why they are regularly applied in greenhouses. To keep a multiwall sheet transparent, it is important to ensure appropriate moisture control in its channels. Condensation or moisture occurs because of differences in interior and exterior temperatures. It is crucial to regulate moisture because ideal conditions for the growth of algae and mold are created when moisture cannot find its way out. This will not only leave your sheets dirty but will also reduce the transmission of light. Leaving the channels slightly open might seem a solution to this problem, but it also allows dust and insects to enter the polycarbonate sheets. Our aluminium venting tape for polycarbonate panels ensures cleanliness, drainage, and condensation control in the channels of any multiwall sheet. We offer vent tape for both the top and bottom of polycarbonate sheets. Would you like assistance or professional advice in choosing the right roofing tape for your type of polycarbonate sheet? We are always happy to advise you on the best choice.

How to close polycarbonate sheets properly

Proper application of roofing tape for multiwall sheets will seal the polycarbonate interior and block debris, while still allowing moisture to exit. Therefore, it is necessary to apply the roofing tape correctly. Our aluminium vent tape for multiwall sheets is easy to apply and performs perfectly under all weather conditions. All types of aluminium venting tapes for polycarbonate panels we offer are coated with a strong outdoor-resistant adhesive. To correctly apply aluminium vent tape for multiwall sheets, you need a masking stripper, a tape gun, a felt pad, or a pressure roller. Always follow the instructions in the tape manual to ensure proper application of our high-quality roofing tape for polycarbonate sheets.